OSHA Outreach Training

What is OSHA Outreach Training?

The Outreach Training Program is our primary method of insuring that workers understand the basics of Occupational Safety and Health. Our OSHA 10 Hour and OSHA 30 Hour courses are designed to instruct workers and supervisors in hazard recognition. Students who complete the required training receive the official OSHA 10 Hour or 30 hour card. Outreach training is available for the construction and general industries.

Benefits of A Safety Training Program

An effective training program can reduce the number of injuries and deaths, property damage, legal liability, illnesses, workers' compensation claims, and missed time from work. A safety training program can also help a trainer keep the required OSHA-mandated safety training courses organized and up-to-date.

Safety training classes help establish a safety culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety as it is easy for seasoned workers to negatively influence the new hires. That negative influence however, can be purged with the establishment of new, hands-on, innovative effective safety training which will ultimately lead to an effective safety culture. A 1998 NIOSH study concluded that the role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

Why Take OSHA Outreach Training?

The primary benefit of OSHA training is in maintaining a workforce that can recognize work-related hazards and act accordingly. If you have ever been hit with an OSHA fine you know that the cost of sending all of your employees to safety school is much less than the cost of a non-compliance fine or a lawsuit.

Who Needs Safety Training?

If you live in Connecticut, Massachusetts, Missouri, Nevada, New Hampshire, New York, or Rhode Island, it is required by law that you must have a minimum of 10 hours of OSHA Accepted safety training to work on a public jobsite. Supervisors and superintendents are required to have a minimum 30 hours of safety training. Often times government jobs, unions, and employers may require either all employees or supervisors to take OSHA Training.

WHICH ONE DO I NEED?

This depends on where you live, your position, and your company and state requirements. If you are a supervisor, we recommend the 30 hour training course, as it goes into much greater depth and covers a wider range of safety topics. If you are an average employee, then you probably want to take the 10 hour training course. Use the tabs above or to the left to find out more about the OSHA Outreach 10 and 30 hour courses.

Should I take online or on-site training?

Whether you take your training online or on-site is entirely up to you. In general we recommend online training, if you want a more comfortable, flexible, self-paced learning environment, and on-site training if you are looking for a more "hands on" learning environment. Either way, Easy Safety School can provide you with the highest quality courses at the lowest prices. We offer excellent group discounts for both online and on-site training. Group discount savings can be up to 70% off the total price.

Enroll In an online OSHA 10 or 30 Hour Course

Online courses now available again!

.

Course Info Hours Price

10 Hour General Industry W/ Study Guide More Less 10.0 $80.10*

Course Information:
Name: OSHA 10 Hour General Industry Certification Course with Study Guide
Credit Hours: 10
Duration: 600 minutes/ 10 hrs
Release Date: N/A
Expiration date: 6 months from registration
Approval Number: N/A
Course Category: OSHA General Industry
Provider Name: 360training.com
Provider Number: N/A

Course Description:
This module covers a minimum of ten (10) hours of courses, required by the Occupational Health and Safety Act (OSHA), which apply toward 10-hour General Industry course completion card. This course is comprised of 10 training modules, covering topics pertaining to regulations covered by Standard 29 CFR 1910. The successful completion of this course will help you to identify common hazards and the proper methods to reduce the risk to yourself.

Course Requirements:
State Requirements: N/A
Seat Time: 600 minutes
Course Pre-Requisite: N/A
Testing:

At the end of every lesson, you will be given a short quiz to test your knowledge of the material presented in every module.

These lesson quizzes will help you prepare for the 10 question module quizzes and ultimately for the final exam. You will be able to view every assessment result, which answers you got wrong and right, and feedback as to why the right answer is the most correct.

You must score at least 70% on each module quiz to move forward in the course. You will be given up to THREE opportunities to pass each module quiz.

Failure to successfully pass the quiz will result in being locked out of this online training program, and you will no longer be able to take the Outreach training in an online format.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course.

You will be given up to THREE opportunities to pass the final exam. Failure to successfully pass the Final Exam will result in being locked out of this online training program, and you will no longer be able to take the Outreach training in an online format.

Course Completion: NOTE: Remember OSHA REQUIRES THE OUTREACH COURSE AND THE END OF COURSE SURVEY BOTH BE COMPLETED WITHIN SIX (6) MONTHS OF BEGINNING THE COURSE OR A DOL CARD WILL NOT BE ISSUED!

Upon successful completion of this course and the accompanying survey, you will receive a completion card from the provider of this course on behalf of the Department of Labor. This completion card will normally take 4-8 weeks to process and ship.

YOU MUST COMPLETE THE SURVEY AT THE END OF THIS TRAINING TO RECEIVE YOUR DOL CARD.

Once you complete the course, you will be provided with a completion certificate which will be available through your My Training page. Please be aware the certificate is not an official document. It serves only as evidence of your completion of the course until you receive your official Department of Labor card in the mail.

10 Hour Construction Industry W/ Study Guide More Less 10.0 $80.10*

This Course Includes:
Course Description
The 10 Hour Construction Industry Outreach Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards on a construction site. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks.

You will find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov.

As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Outreach Trainers at outreach-trainer@360training.com. For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG.

When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.

As for the course itself, please remember that you have six months from the time you start this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.

At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz.

Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course.

You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your outreach training in an online format.

Course Credit
10 Hours

Course Outline:

Orientation
Module 1: Introduction to OSHA and the OSH Act
Module 2: General safety and Health Provisions
Module 3A: Health Hazards: Hazard Communication
Module 3B: Health Hazards: Hazardous Materials
Module 4: Cranes and Rigging
Module 5: Focus Four: Electrical Safety
Module 6: Struck- By and Caught in Between
Module 7: Fall Protection
Module 8: Personal Protective Equipment
Module 9: Hand and Power tools
Module 10: Scaffolds
Module 11: Stairways and Ladders
Final Exam
Who Should Take the Course?

Entry Level Construction Workers.
Why Are Customers Taking the Course?

Employer Requirement
State Requirement
Nevada Effective January 1, 2010
Missouri Effective August 28, 2009
New York Effective July 2008
Connecticut (Requirement Specific to Certain Kinds of Job Sites)
Subject Matter Expert Information

Luis Quintanar is a bilingual safety professional fluent in English, and Spanish conducting over 300 courses, job site specific plans, hazard assessments, job hazard analysis, and regulatory aimed audits for the construction, oil & gas, transportation, energy services and general industries.
Luis holds over 300 training certifications in the following areas :

OSHA / EPA / RCRA / CERCLA / NIOSH / ANSI / IATA / IMDG / CTPAT / DOT

OSHA Certification # 500 - Trainer Certification in Occupational Safety and Health Standards for Construction Industry.

OSHA Certification # 501 - Trainer Certification in Occupational Safety and Health Standards for General Industry.


Course (click title for details) Info Hours Price

30 Hour General Industry W/ Study Guide More Less 30.0 $170.10*

Course Information:
Name: OSHA 30 Hour General Industry Certification Course with Study Guide
Credit Hours: 30 Hrs
Duration: 1800 minutes/30 Hours
Release Date: N/A
Expiration date: 6 months after Registration
Approval Number: N/A
Course Category: OSHA General Industry
Provider Name: 360training.com
Provider Number: N/A

Bundled Items
Course Description:
This Course covers a minimum of thirty (30) hours of topics, required by the Occupational Health and Safety Act (OSHA), which apply toward 30-hour General Industry course completion card. This Course is comprised of 24 sections, each from one or two hours in length, and covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help you to identify common hazards and the proper methods to reduce the risk to yourself.

Course Requirements:
State Requirements: N/A
Seat Time: 600 minutes
Course Pre-Requisite: N/A
Testing:

At the end of every lesson, you will be given a short quiz to test your knowledge of the material presented in every module.

These lesson quizzes will help you prepare for the 10 question module quizzes and ultimately for the final exam. You will be able to view every assessment result, which answers you got wrong and right, and feedback as to why the right answer is the most correct.

You must score at least 70% on each module quiz to move forward in the course. You will be given up to THREE opportunities to pass each module quiz.

Failure to successfully pass the quiz will result in being locked out of this online training program, and you will no longer be able to take the Outreach training in an online format.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course.

You will be given up to THREE opportunities to pass the final exam. Failure to successfully pass the Final Exam will result in being locked out of this online training program, and you will no longer be able to take the Outreach training in an online format.

Course Completion:

NOTE: Remember OSHA REQUIRES THE OUTREACH COURSE AND THE END OF COURSE SURVEY BOTH BE COMPLETED WITHIN SIX (6) MONTHS OF BEGINNING THE COURSE OR A DOL CARD WILL NOT BE ISSUED!

Upon successful completion of this course and the accompanying survey, you will receive a completion card from the provider of this course on behalf of the Department of Labor. This completion card will normally take 4-8 weeks to process and ship.

YOU MUST COMPLETE THE SURVEY AT THE END OF THIS TRAINING TO RECEIVE YOUR DOL CARD.

Once you complete the course, you will be provided with a completion certificate which will be available through your My Training page. Please be aware the certificate is not an official document. It serves only as evidence of your completion of the course until you receive your official Department of Labor card in the mail.

30 Hour Construction Industry W/ Study Guide More Less 30.0 $170.10*

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

This Course covers thirty (30) hours of courses, required by the Occupational Health and Safety Act (OSHA) that apply toward 30-hour Construction Industry course completion card. This module is comprised of 24 sections, each either one or two hours in length, and covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet the Construction Industry standards established by OSHA.

You will also find supplementary materials available for download by clicking the ""Materials"" tab on the menu located within the courseplayer. You can find printable course summaries of each module in addition to a syllabus of the entire 30 hour course. Other reference materials are available from the OSHA website; please visit www.osha.gov.

When taking this course, please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.

As for the course itself, please remember that you have six months from the time you signed up for this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.

. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz.

Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course.

You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your outreach training in an online format.

*Use discount code "EASY10" to get this price

Our OSHA Outreach training courses now come with free study guides!

Having Trouble? Visit our Secure Store directly!

For on-site training please visit our on-site OSHA Training page.

OSHA Outreach 10 Hour Training

The 10 hour training program is intended for workers, foremen, superintendents and anyone involved in public work. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Ten hour training is available for both general industry and construction industry. You will receive your OSHA 10 hour DOL card in the mail upon successful completion of the course. This course is available online and on-site. The online course has been reviewed and accepted by OSHA.

For more information or to enroll in an a course visit our OSHA 10 Hour Training page.

OSHA Outreach 30 Hour Training

The 30 hour training program is intended for workers, foremen, superintendents and anyone involved in public work. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Thirty hour training is available for both general industry and construction industry. You will receive your OSHA 30 hour DOL card in the mail upon successful completion of the course. This course is available online and on-site. The online course has been reviewed and accepted by OSHA.

For more information or to enroll in an OSHA Outreach Course visit our OSHA 30 Hour Training page.